|
Instruction: This product is suitable for grinding the straight line double edging of flat glass.Coarse grindng,fine grinding,polishing can be done at one time.
Gliding of grinding head holder adopts double straight line rolling glide.Double ball screw rod transminssion stabilizes moving speed and eliminates moving gap,reduces resistance and abrasion,and ensure repeated positioning.This product adopts PLC control system. Set parameters via interface and finish processing at one time .The transmission belt drive adopts frequency conversion motor to control speed ,constant rule,output and advanced equipment to conrtol.
The product has stale structure,precise and smooth rtansmission system,advanced configuration control system,intermediate and small size processing capacity.It is suitable for the processing of furniture glass and architecture glass .
|
Model |
SSZM1500G |
|
Min processing area |
230*230mm |
|
Thickness of glass processing |
3-28mm |
| Polishing safety angle width |
45,0-1.5mm |
|
Speed range |
1000-6500mm/min |
|
Total power |
52.7kw A:57.kw C:53.5 kw |
|
Diamond wheel |
D:2+2 |
|
Polishing wheel |
P:5+5 |
|
Resin wheel |
R:3+3 |
|
Min processing width |
230mm |
|
Width of chamfering edge |
1-3mm |
|
Max grinding quantity of bottom edge |
5mm(single side) |
|
Max grinding quantity of chamfering edges |
3mm |
|
Movement speed of sliding grinding heads |
700mm/min |
|
Height of working platform |
900mm |
|
Pneumatic working pressure |
0.7Mpa |
|
Air quantity of blower |
1069m3/h |
|
Water pump displacement |
10m3/h(single pump) |
| Parallel tolerance of processing glass |
0.2mm/m |
| Diagonal tolerance of processing glass |
0.5mm/m |
| Chamrer tolerance |
0.2mm/m | |
